316 And 317 Stainless Steel Wire
Introduction To Steel Wire
Stainless steel wire drawing (stainless steel wire drawing): a metal plastic processing process in which a wire rod or a wire blank is drawn from a die hole of a wire drawing die under the action of a drawing force to produce a small-section steel wire or a non-ferrous metal wire. Wires with different cross-sectional shapes and sizes of various metals and alloys can be produced by drawing. The drawn wire has precise dimensions, smooth surface, simple drawing equipment and molds, and easy manufacturing.
Product Display
Process Characteristics
The stress state of wire drawing is the three-dimensional principal stress state of two-way compressive stress and one-way tensile stress. Compared with the principal stress state where all three directions are compressive stress, the drawn metal wire is easier to reach the state of plastic deformation. The deformation state of drawing is a three-way main deformation state of two-way compression deformation and one tensile deformation. This state is not good for the plasticity of metal materials, and it is easier to produce and expose surface defects. The amount of pass deformation in the wire drawing process is limited by its safety factor, and the smaller the amount of pass deformation, the more the drawing passes. Therefore, multiple passes of continuous high-speed drawing are often used in the production of wire.
Product Category
Generally, it is divided into 2 series, 3 series, 4 series, 5 series and 6 series stainless steel according to austenitic, ferritic, two-way stainless steel and martensitic stainless steel.
316 and 317 stainless steel (see below for the properties of 317 stainless steel) are molybdenum-containing stainless steels. The content of molybdenum in 317 stainless steel is slightly higher than that of 316 stainless steel. Due to the molybdenum in steel, the overall performance of this steel is better than 310 and 304 stainless steel. Under high temperature conditions, when the concentration of sulfuric acid is lower than 15% and higher than 85%, 316 Stainless steel has a wide range of uses. 316 stainless steel also has good resistance to chloride corrosion, so it is usually used in marine environments. 316L stainless steel has a maximum carbon content of 0.03, which can be used in applications where annealing cannot be carried out after welding and maximum corrosion resistance is required
Related products
-
Roofing color steel tile
Specifications Anticorrosive tile is a kind of highly effective anticorrosive tile. And the rapid advance of modern science and technology creates all kinds of new anti-corrosion tiles, durable, colorful, how should we choose high-quality roof anti-corrosion tiles? 1. Whether the coloring is uniform Anticorrosive tile coloring is about the same as we buy clothes, need to observe the color difference, goo...
-
Carbon Steel Alloy Steel Plate
Product Category 1. Used as steel for various machine parts. It includes carburized steel, quenched and tempered steel, spring steel and rolling bearing steel. 2. Steel used as engineering structure. It includes A, B, special grade steel and ordinary low alloy steel in carbon steel. Carbon structural steel High-quality carbon structural steel hot-rolled thin steel plates and steel strips are used in the automotive, aerospac...
-
Carbon steel welding tee seamless stamping 304 316
Product description The three-way has three openings, namely one inlet, two outlet; Or a chemical pipe fitting with two inlet and one outlet, with T shape and Y shape, with equal diameter pipe mouth, and also with different diameter pipe mouth, used for three same or different pipe convergence. The main function of the tee is to change the direction of the fluid. Tee also known as pipe fittings tee or te...
-
Pickling Hot Rolled Steel Coil
Dimensions The size of the steel plate should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Plates (Excerpted from GB/T709-1988)". The size of the steel strip should meet the requirements of the table "Dimensions and Specifications of Hot Rolled Steel Strip (Excerpted from GB/T709-1988)". The width of the steel plate can also be any size of 50mm or a multiple of 10mm. The length of th...
-
Cold Drawn Stainless Steel Round Bar
Characteristic 304 stainless steel is the most widely used chromium-nickel stainless steel, which has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. Corrosion resistant in the atmosphere, if it is an industrial atmosphere or a heavily polluted area, it needs to be cleaned in time to avoid corrosion. Product Display ...
-
House color steel tile
Concept From finishing the last hot steel strip mill out through laminar flow cooling to the set temperature, which consists of the winder coil, steel coil after cooling, according to the different needs of users, with different finishing line (flat, straightening, transverse or longitudinal cutting, inspection, weighing, packaging and logo, etc.) and become a steel plate, flat roll and longitudinal cutting steel strip prod...