Stainless steel Bar
-
Stainless Steel Round Bar With Good Quality
Chromium (Cr): is the main ferrite forming element, chromium combined with oxygen can generate corrosion-resistant Cr2O3 passivation film, is one of the basic elements of stainless steel to maintain corrosion resistance, chromium content increases the passivation film repair ability of steel, the general stainless steel chromium content must be above 12%;
-
2205 304l 316 316l Hl 2B Brushed Stainless Steel Round Bar
Stainless steel round steel is not only a long product, but also a bar. The so-called stainless steel round steel refers to a long product with a uniform circular cross-section, generally about four meters in length. Can be divided into aperture and black rod. The so-called smooth circle means that the surface is smooth and has undergone quasi-rolling treatment; the so-called black strip means that the surface is thick and black and is directly hot-rolled.
-
Cold Drawn Stainless Steel Round Bar
304L stainless steel round steel is a variant of 304 stainless steel with lower carbon content, and is used where welding is required. The low carbon content minimizes the precipitation of carbides in the heat-affected zone near the weld, and the precipitation of carbides may cause stainless steel to produce intergranular corrosion in some environments
-
Cold Rolled Stainless Steel Round Steel
Stainless steel round steel belongs to the category of long products and bars. The so-called stainless steel round steel refers to long products with uniform circular cross-section, generally about four meters in length. It can be divided into light circles and black rods. The so-called smooth circle refers to the smooth surface, which is obtained by quasi-rolling treatment; and the so-called black bar refers to the black and rough surface, which is directly hot rolled.
-
Stainless Steel Square Rectangular Bar/Rod
Stainless steel round steel belongs to the category of long products, but also belongs to the category of bars, the so-called stainless steel round steel refers to the cross section of uniform round long products, generally about four meters long. -
No. 45 round steel cold drawing round chrome plating bar arbitrary zero cut
Round steel is classified as hot rolled, forged and cold drawn. Hot rolled round steel is 5.5-250 mm in size. Among them: 5.5-25 mm small round steel mostly to straight strip into bundles of supply, commonly used for reinforcing bars, bolts and various mechanical parts; Round steel larger than 25 mm, mainly used in the manufacture of mechanical parts, seamless steel pipe blank, etc.
