Galvanized Pipe Square Steel Galvanized Pipe Suppliers 2mm Thickness Hot Galvanized Square Steel
Square Steel
Square steel:is solid, bar stock. Distinguished from square tube, hollow, which is a pipe. Steel (Steel): is a material made of ingots, billets or steel by pressure processing into various shapes, sizes and properties required. Medium-thick steel plate, thin steel plate, electrical silicon steel sheet, strip steel, seamless steel pipe steel, welded steel pipe, metal products and other varieties.
Square Steel Theoretical Weight Table
| Side length（mm) | Cross-sectional area(cm2) | Theoretical weight (kg/m) | Side Length（mm) | Cross-sectional area(cm2) | Theoretical weight(kg/m) |
| 5mm | 0.25 | 0.196 | 30mm | 9.00 | 7.06 |
| 6mm | 0.36 | 0.283 | 32mm | 10.24 | 8.04 |
| 7mm | 0.49 | 0.385 | 34mm | 11.56 | 9.07 |
| 8mm | 0.64 | 0.502 | 36mm | 12.96 | 10.17 |
| 9mm | 0.81 | 0.636 | 38mm | 14.44 | 11.24 |
| 10mm | 1.00 | 0.785 | 40mm | 16.00 | 12.56 |
| 11mm | 1.21 | 0.95 | 42mm | 17.64 | 13.85 |
| 12mm | 1.44 | 1.13 | 45mm | 20.25 | 15.90 |
| 13mm | 1.69 | 1.33 | 48mm | 23.04 | 18.09 |
| 14mm | 1.96 | 1.54 | 50mm | 25.00 | 19.63 |
| 15mm | 2.25 | 1.77 | 53mm | 28.09 | 22.05 |
| 16mm | 2.56 | 2.01 | 56mm | 31.36 | 24.61 |
| 17mm | 2.89 | 2.27 | 60mm | 36.00 | 28.26 |
| 18mm | 3.24 | 2.54 | 63mm | 39.69 | 31.16 |
| 19mm | 3.61 | 2.82 | 65mm | 42.25 | 33.17 |
| 20mm | 4.00 | 3.14 | 70mm | 49.00 | 38.49 |
| 21mm | 4.41 | 3.46 | 75mm | 56.25 | 44.16 |
| 22mm | 4.84 | 3.80 | 80mm | 64.00 | 50.24 |
| 24mm | 5.76 | 4.52 | 85mm | 72.25 | 56.72 |
| 25mm | 6.25 | 4.91 | 90mm | 81.00 | 63.59 |
| 26mm | 6.76 | 5.30 | 95mm | 90.25 | 70.85 |
| 28mm | 7.84 | 6.15 | 100mm | 100.00 | 78.50 |
The length of square steel is specified as follows.
A. Usual lengths (not of fixed length).
Common steel.
Side length ≤ 25mm ........................... ..................... length 5~10m
Side length 26~50mm .... .............................. .......... length 4~9m
Side length 53~110mm .... .............................. ......... length 4~8m
Side length ≥120mm .... .............................. ............. length 3~6m
High quality steel.
Various side length sizes ........................... ............... length 2~6m
B. Fixed length (determined in the contract)
C. Multi-length (determined in the contract)
Typical Use
Stainless steel square is mainly used more in finishing, such as doors and windows.
Main Products
Hot rolled square steel
Hot rolled square steel, is steel that is rolled or machined into a square cross section. Square steel can be divided into two types: hot-rolled and cold-rolled; hot-rolled square steel has a side length of 5-250mm and cold-drawn square steel has a side length of 3-100mm.
Square Steel
[square steel] steel rolled or worked into a square cross section
The density of steel is: 7.851g/cm3
Calculation of the theoretical weight of steel
The unit of measurement for calculating the theoretical weight of steel is the kilogram (kg). The basic formula is.
W (weight, kg) = F (cross-sectional area mm2) × L (length, m) × ρ (density, g/cm3) × 1/1000
Square steel can be divided into two types: hot-rolled and cold-rolled; hot-rolled square steel with side lengths of 5-250mm and cold-drawn square steel with side lengths of 3-100mm.
Cold-drawn square steel
Cold-drawn square steel refers to cold-drawn steel with square shape of forging
Cold-drawn square steel refers to cold-drawn steel with square shape.
Cold drawn steel is forcibly stretched steel under room temperature conditions with tensile stress exceeding the yield point strength of the original steel bar to produce plastic deformation of the steel bar in order to improve the yield point strength of the steel bar and save steel for the purpose.
Cold drawing is the use of cold extrusion technology, through the precise die, pull out all kinds of high-precision, smooth surface round steel, square steel, flat steel, hexagonal steel and other shaped steel.
The concept of cold drawing of steel bars: to save steel, improve the yield strength of steel bars for the purpose of tensile stress beyond the yield strength and less than the ultimate strength to stretch the steel bars, so that the practice of plastic deformation is called cold drawing of steel bars.
Stainless steel square steel
[square steel] rolled or processed into a square cross-section
Stainless steel square steel
Calculation of theoretical weight of steel
The unit of measurement for calculating the theoretical weight of steel is the kilogram (kg). The basic formula is.
W (weight, kg) = F (cross-sectional area mm2) × L (length, m) × ρ (density, g/cm3) × 1/1000
Product use
Stainless steel square steel is mainly used more in the finishing, such as doors and windows.
Product specification
Cold-drawn bright square steel: 3×3mm-80×80mm
Twisted square steel
The diameter of twisted square steel is 4mm - 10mm, the common specifications are 6*6mm and 5*5mm, which are twisted from 8mm and 6.5mm diameter coil elements drawn and twisted respectively.
Material: Q235.
Torque: standard torque of 120mm/360 degrees, the standard torque is relatively beautiful and practical.
Use: Widely used in steel grating, steel structure or reinforced concrete to replace rebar.
Advantages: twisted and twisted square steel increases the tensile force of the structure, beautiful appearance, greatly reducing capital costs; sharp edges, accurate diameter.
Related products
-
Q345b Steel Plate
Product Introduction Place of Origin: Shandong, China Brand Name: zhongao Application: ship plate, boiler plate, manufacturing cold-rolled steel products, manufacturing small tools, flange plate Type: steel plate, steel plate Thickness: 16-25mm Standard: AiSi Width: 0.3mm-3000mm, customized Length: 30mm-2000mm, customized Certificate: ISO9001 Grade: Carbon Steel Tolerance: ±1% Processing services: welding, punching, cutting...
-
Fine drawn seamless alloy tube cold drawn hollo...
Product description Alloy steel pipe is mainly used for power plants, nuclear power plants, high pressure boilers, high temperature superheater and reheater and other high pressure and high temperature pipes and equipment, it is made of high quality carbon steel, alloy structural steel and stainless heat resistant steel material, by hot rolling (extrusion, expansion) or cold rolling (drawing). ...
-
DN20 25 50 100 150 Galvanized steel pipe
Product description The galvanized steel pipe is immersed in a zinc coating to protect the pipe from corrosion in wet environments, thus extending the service life. It is most commonly used in plumbing and other water supply applications. Galvanized pipe is also a low cost alternative to steel and can achieve up to 30 years of rust protection while maintaining a comparable strength and durable surface co...
-
Construction square rectangular pipe welded bla...
Product description We offer round, square and shaped welded steel tubes. Material, size can be selected according to customer needs. We also provide surface treatment services: A. sanding B.400#600# mirror C. Hairline drawing D. tin-titanium E.HL wire drawing and mirror (2 finishes for one tube). 1. Hot rolling, cold rolling or cold drawing technology. 2. Hollow section, lighter weight, higher pressure....
-
Special steel 20# hexagon 45# hexagon 16Mn squa...
Product description Special-shaped steel is one of the four types of steel (type, line, plate, tube), is a kind of widely used steel. According to the section shape, section steel can be divided into simple section steel and complex or special-shaped section steel (special-shaped steel). The characteristic of the former is that it does not cross the cross section of any point on the periphery of the tang...
-
Color pressure tile
Specifications The thickness is 0.2-4mm, the width is 600-2000mm, and the length of the steel plate is 1200-6000mm. The production process Due to no heating in the production process, there is no hot rolling often occur pitting and oxide iron defects, good surface quality, high finish. Moreover, the size precision of cold-rolled products is high, and the properties and structure of cold-rolled products can meet some special...