Hot Rolled Stainless Steel Angle Steel
Product Introduction
It is mainly divided into two types: equilateral stainless steel angle steel and unequal stainless steel angle steel. Among them, unequal side stainless steel angle steel can be divided into unequal side thickness and unequal side thickness.
The specifications of stainless steel angle steel are expressed in terms of side length and side thickness. At present, the domestic stainless steel angle steel specifications are 2-20, and the number of side length centimeters is used as the serial number. Stainless steel angles with the same number usually have 2-7 different side wall thicknesses. The imported stainless steel angles indicate the actual size and thickness of both sides, and indicate the relevant standards. In general, large stainless steel corners with a side length of 12.5 cm or more, medium stainless steel corners with a side length between 12.5 cm and 5 cm, and small stainless steel corners with a side length of 5 cm or less.
1. Petroleum waste gas combustion pipeline
2. Engine exhaust pipe
3. Boiler shell, heat exchanger, heating furnace parts
4. Silencer parts for diesel engines
5. Boiler pressure vessel
6. Chemical Transport Truck
7. Expansion joint
8. Spiral welded pipes for furnace pipes and dryers
Product Display
Types And Specifications
It is mainly divided into two types: equilateral stainless steel angle steel and unequal side stainless steel angle steel. Among them, unequal side stainless steel angle steel can be divided into unequal side thickness and unequal side thickness.
Commonly Used Products, Specifications And Standards
GB/T2101—89 (General requirements for section steel acceptance, packaging, marking and quality certificate); GB9787—88/GB9788—88 (Hot-rolled equilateral/unequilateral stainless steel angle steel size, shape, weight and allowable deviation); JISG3192 —94 (shape, size, weight and tolerance of hot rolled section steel); DIN17100—80 (quality standard for or dinary structural steel); ГОСТ535—88 (technical conditions for ordinary carbon section steel).
According to the above-mentioned standards, stainless steel angle steel should be delivered in bundles, and the number of bundles and the length of the same bundle should comply with the regulations. Stainless steel angle steel is generally delivered naked, and transportation and storage must be protected from moisture.
Related products
-
201 Stainless Steel Angle Steel
Product Introduction Standards: AiSi, ASTM, DIN, GB, JIS Grade: SGCC Thickness: 0.12mm-2.0mm Place of Origin: Shandong, China Brand Name: zhongao Model: 0.12-2.0mm*600-1250mm Process: Cold rolled Surface treatment: galvanized Application: Container Board Special purpose: high-strength steel plate Width: 600mm-1250mm Length: customer request Surface: galvanized coating Material: SGCC/ CGCC/ TDC51DZ...
-
321 Stainless Steel Angle Steel
Application It is applied to outdoor machines in the chemical, coal, and petroleum industries that require high grain boundary corrosion resistance, heat-resistant parts of building materials, and parts that have difficulty in heat treatment 1. Petroleum waste gas combustion pipeline 2. Engine exhaust pipe 3. Boiler shell, heat exchanger, heating furnace parts 4. Silencer parts for diesel engines 5. Boil...
-
Equilateral Stainless Steel Angle Steel
Product Introduction Standards: AiSi, ASTM, bs, DIN, GB, JIS Grade: Q195-Q420 series, Q235 Place of Origin: Hebei, China, Hebei, China (Mainland) Brand: Jinbaicheng Model: 2#-20#- dcbb Type: equivalent Application: Building, Construction Tolerance: ±3%, strictly in accordance with G/B and JIS standards Commodities: Angle Steel, Hot Rolled Angle Steel, Angle Steel Size: 20*20*3mm-200*200 *24mm Leng...
-
ASTM 201 316 304 Stainless Angle Bar
Product Introduction Standard: AiSi, JIS, AISI, ASTM, GB, DIN, EN, etc. Grade: Stainless Steel Place of Origin: China Brand Name:zhongao Model Number: 304 201 316 Type: Equal Application: Shelfs, Brackets, Bracing, Structural support Tolerance: ±1% Processing Service:Bending, Welding, Punching, Decoiling, Cutting Alloy Or Not: Is Alloy Delivery Time: within 7 days Product name: Hot Rolled 201 316 304 Stainless Angl...