Hot rolled coil/HRC
-
Pickling Hot Rolled Steel Coil
Hot-rolled plates, namely hot-rolled steel plates and steel strips, commonly known as hot plates, are usually written in the word “hot-rolled”, such as hot-rolled plates, but they all refer to the same kind of hot-rolled plates. Refers to steel plates with a width greater than or equal to 600mm and a thickness of 0.35-200mm and steel strips with a thickness of 1.2-25mm.
-
Hot Rolled Steel Coil
Hot rolled (Hot rolled), that is, hot rolled coil, it uses slab (mainly continuous casting billet) as raw material, and after heating, it is made into strip steel by rough rolling mill and finishing mill. The hot steel strip from the last rolling mill of finishing rolling is cooled to a set temperature by laminar flow, and then coiled into a steel strip coil by a coiler, and the cooled steel strip coil.
-
Hot Rolled Pickled Oil Coated Coil
Cold coils are made of hot-rolled coils as raw materials and rolled at room temperature below the recrystallization temperature. They include plates and coils. Among them, the delivered sheet is called steel plate, also called box plate or flat plate; the length is very long, Delivery in coils is called steel strip or coiled plate.
-
High-Precision Pattern Coil
Patterned coils, or patterned steel plates, are also called reticulated steel plates, which are steel plates with rhombuses or ribs on the surface. Because of the ribs on the surface, the patterned steel plate has anti-skid effect, and can be used as floor, factory escalator, work frame pedal, ship deck, automobile floor, etc.
-
A36 SS400 S235JR Hot Rolled Steel Coil /HRC
Steel coil, also known as coiled steel. The steel is hot-pressed and cold-pressed into rolls. In order to facilitate storage and transportation, and facilitate various processing (for example, processing into steel plates, steel belts, etc.) Patterned coils, or patterned steel plates, are also called reticulated steel plates, which are steel plates with rhombuses or ribs on the surface. Due to the ribs on its surface, the patterned steel plate has anti-skid effect, and can be used as floor, factory escalator, work frame pedal, ship deck, automobile floor, etc. The specifications of checkered steel plates are expressed in terms of basic thickness (not counting the thickness of the ribs), and there are 10 specifications of 2.5-8 mm. No. 1-3 is used for checkered steel plate.