The angle steel can be used to form various stressed members according to the different needs of the structure, and can also be used as a connector between members. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, hoisting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, warehouse shelves, etc.
The angle steel is a carbon structural steel used for construction. It is a simple section steel, mainly used for metal components and plant frames. Good weldability, plastic deformation performance and certain mechanical strength are required in use. The raw steel billet for angle steel production is low carbon square steel billet, and the finished angle steel is delivered in the hot rolling forming, normalizing or hot rolling state. Angle iron, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other.
Angle steel can be divided into equal angle steel and unequal angle steel. The width of two sides of an equilateral angle steel is equal. Its specification is based on the width of the side × Side width × The number of millimeters of the edge thickness. Such as “N30″ × thirty × 3 “means equal leg angle steel with side width of 30 mm and side thickness of 3 mm. It can also be represented by model, which is the centimeter number of side width. For example,” N3 # “model does not mean the dimensions of different side thicknesses in the same model. Therefore, the side width and side thickness dimensions of the angle steel shall be filled out completely in the contract and other documents to avoid using model alone.
Post time: Feb-13-2023