No. 45 round steel cold drawing round chrome plating bar arbitrary zero cut
Product description
1. Low carbon steel: Carbon content from 0.10% to 0.30% Low carbon steel is easy to accept a variety of processing such as forging, welding and cutting, often used in the manufacture of chains, rivets, bolts, shafts, etc.
2. High carbon steel: Often called tool steel, carbon content from 0.60% to 1.70%, can be hardened and tempered. Hammers and crowbars are made of steel with carbon content of 0.75%; Cutting tools such as drills, taps and reamers are manufactured from steel with carbon content of 0.90% to 1.00%.
3. Medium carbon steel: In the medium strength level of various uses, medium carbon steel is the most widely used, in addition to as a building material, but also a large number of mechanical parts.
Classification
According to the use can be divided into carbon structural steel, carbon tool steel.
Product packaging
1.2 layer PE foil protection.
2. After binding and making, cover with polyethylene waterproof cloth.
3. Thick wood covering.
4. LCL metal pallet to avoid damage, wooden pallet full load.
5. According to customer requirements.
Company profile
Shandong Zhongao Steel Co. LTD. is a large-scale iron and steel enterprise integrating sintering, iron making, steel making, rolling, pickling, coating and plating, tube making, power generation, oxygen production, cement and port.
The main products include sheet (hot rolled coil, cold formed coil, open and longitudinal cut sizing board, pickling board, galvanized sheet), section steel, bar, wire, welded pipe, etc. The by-products include cement, steel slag powder, water slag powder, etc.
Among them, fine plate accounted for more than 70% of the total steel production.
Detail drawing
Related products
-
Boiler Vessel Alloy Steel Plate
The Main Purpose Used for building railway bridges, highway bridges, sea-crossing bridges, etc. It is required to have high strength, toughness, and to withstand the load and impact of rolling stock, and to have good fatigue resistance, certain low temperature toughness and atmospheric corrosion resistance. The steel for tie-welding bridges should also have good welding performance and low notch sensitivity. ...
-
Hexagonal Shaped Steel Pipe
Product Introduction Standards: JIS, AiSi, ASTM, GB, DIN, EN, AISI, ASTM, BS, DIN, GB, JIS Grade: Q235/304 Place of Origin: Shandong, China Brand Name: zhongao Model: Q235/304 Type: Hexagonal Application: Industry, Rebar Shape: Hexagonal Special purpose: valve steel Tolerance: ±1% Processing services: bending, welding, uncoiling, punching, cutting, bending, cutting Product Name: Hexagonal Steel Bar Materia...
-
SS400ASTM A36 Hot Rolled Steel Plates
Technical Parameter Place of Origin: China Type: Steel Sheet, Steel Coil or Steel Plate Thickness: 1.4-200mm, 2-100mm Standard: GB Width: 145-2500mm, 20-2500mm Length: 1000-12000mm, as your request Grade: q195,q345,45#,sphc,510l,ss400, Q235, Q345,20#,45# Skin Pass: YES Alloy Or Not: Non-Alloy Delivery Time: 22-30 days Product Name: Surface: SPHC ,hot rolled Technique: Cold rolled or Hot rolled Application: Construction and ...
-
Stainless Steel Rod Ultra Thin Metal Wire
Introduction To Steel Wire Steel grade: Steel Standards: AISI, ASTM, BS, DIN, GB, JIS Origin: Tianjin, China Type: Steel Application: industrial, manufacturing fasteners, nuts and bolts, etc Alloy or not: non alloy Special purpose: free cutting steel Model: 200, 300, 400, series Brand name: zhongao Grade: stainless steel Certification: ISO Content (%): ≤ 3% Si content (%): ≤ 2% Wire ga...
-
A355 P12 15CrMo Alloy Plate Heat-Resistant Stee...
Material Description As for the steel plate and its material, not all steel plates are the same, the material is different, and the place where the steel plate is used is also different. 4. Classification of steel plates (including strip steel): 1.Classified by thickness: (1) thin plate (2) medium plate (3) thick plate (4) extra thick plate 2. Classified by production method: (1) Hot rolled steel sheet (2) Cold rolled ste...
-
Hot Rolled Pickled Oil Coated Coil
Specification The thickness is 0.2-4mm, the width is 600-2000mm, and the steel plate length is 1200-6000mm. Production Process In the production process, heating is not carried out, so there are no defects such as pitting and iron scale that often occur in hot rolling, and the surface quality is good and the smoothness is high. Moreover, the di...