Products
-
ST37 Carbon steel coil
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
-
NM500 Carbon steel plate
NM500 steel plate is a high-strength wear-resistant steel plate with high wear resistance. NM500 wear-resistant steel plate is widely used in engineering machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product parts.
-
Carbon steel plate
Carbon steel plate is a type of steel plate mainly composed of iron and carbon elements, with a carbon content usually below 2%. It is one of the most important and commonly used metal sheets in engineering technology, widely used in various fields such as construction, machinery, automobiles, ships, etc.
-
SA516GR.70 Carbon steel plate
SA516Gr. 70 is widely used in petroleum, chemical industry, power station, boiler and other industries to make reactors, heat exchangers, separators, spherical tanks, gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, liquefied petroleum gas cylinders, high-pressure water pipes of hydropower stations, water turbine shells and other equipment and components.
-
A36/Q235/S235JR Carbon Steel Plate
A36 is a low-carbon steel containing trace amounts of manganese, phosphorus, sulfur, silicon and other elements such as copper. A36 has good weldability and high yield strength, and is the structural steel plate specified by the engineer. ASTM A36 steel plate is often manufactured into a variety of structural steel parts. This grade is used for welded, bolted or riveted construction of bridges and buildings, as well as for general structural purposes. Due to its low yield point, A36 carbon plate can be used to design lighter weight structures and equipment, and provide good weldability. Construction, energy, heavy equipment, transportation, infrastructure and mining are the industries where A36 panels are commonly used.
-
AISI/SAE 1045 C45 Carbon Steel Bar
1045 is characterized by medium carbon, medium tensile strength steel, which has quite good strength, machinability and reasonable weldability under hot-rolled conditions. 1045 round steel can be provided with hot rolling, cold drawing, rough turning or turning and polishing. By cold-drawing the 1045 steel bar, the mechanical properties can be improved, the dimensional tolerance can be improved, and the surface quality can be improved.
-
HRB400/HRB400E Rebar Steel Wire Rod
HRB400, As a model of hot-rolled ribbed steel bars. HRB “is the identification of steel bars used in concrete, while” 400 “indicates a tensile strength of 400MPa, which is the maximum stress that the steel bars can withstand under tension.
-
Carbon Steel Reinforcing Bar (Rebar)
Carbon steel is the most common form of steel rebar (short for reinforcing bar or reinforcing steel). Rebar is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression.
-
ASTM a36 Carbon steel bar
ASTM A36 steel bar is one of the most common grades of steel used in structural applications. This mild carbon steel grade contains chemical alloys that give it properties such as machinability, ductility, and strength that are ideal for use in constructing a variety of structures.
-
ASTM A283 Grade C Mild Carbon Steel Plate / 6mm Thick Galvanized Steel Sheet Metal Carbon Steel Sheet
Shipping: Support Sea freight
Model Number: 16mm thick steel plate
Type: Steel Plate, Hot Rolled Steel Sheet, Steel plate
Technique: Hot Rolled, Hot rolled
Surface Treatment: black,Oiled,unoiled
Special Use: High-strength Steel Plate
Width: 1000~4000mm, 1000~4000mm
Length: 1000~12000mm, 1000~12000mm -
304 Stainless Steel Plate
304 stainless steel is a general steel with good corrosion resistance. Its thermal conductivity is better than that of austenite, its coefficient of thermal expansion is smaller than that of austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical properties at the weld. 304stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 304F is a kind of steel with free cutting performance on 304 steel. It is mainly used for automatic lathes, bolts and nuts. 430lx adds Ti or Nb to 304 steel and reduces the content of C, which improves the processability and welding performance. It is mainly used in hot water tank, hot water supply system, sanitary ware, household durable appliances, bicycle flywheel, etc.
-
Stainless Steel Hammered Sheet/SS304 316 Embossed Pattern Plate
We can manufacture various kinds of stainless steel checkered sheet , Our embossing pattern includes pearl board, small squares, lozenge grid lines, antique checkered, twill, chrysanthemum, bamboo, sand plate, cube, free grain, stone pattern, butterfly, small diamond, oval, panda, european-style decorative pattern etc. Customized pattern also can be available.