• Zhongao

Stainless steel series

  • Stainless Steel Rod Ultra Thin Metal Wire

    Stainless Steel Rod Ultra Thin Metal Wire

    Stainless steel wire, also known as stainless steel wire, is a wire product of various specifications and models made of stainless steel. The origin is the United States, the Netherlands, and Japan, and the cross section is generally round or flat. Common stainless steel wires with good corrosion resistance and high cost performance are 304 and 316 stainless steel wires.

  • 316 And 317 Stainless Steel Wire

    316 And 317 Stainless Steel Wire

    Stainless steel wire, also known as stainless steel wire, is a wire product of various specifications and models made of stainless steel. The origin is the United States, the Netherlands, and Japan, and the cross section is generally round or flat. Common stainless steel wires with good corrosion resistance and high cost performance are 304 and 316 stainless steel wires.

  • 316L Stainless Steel Wire

    316L Stainless Steel Wire

    316L stainless steel wire, dull, hot rolled to the specified thickness, then annealed and descaled, a rough, matte surface that does not require surface gloss

  • Stainless Steel Round Bar With Good Quality

    Stainless Steel Round Bar With Good Quality

    Chromium (Cr): is the main ferrite forming element, chromium combined with oxygen can generate corrosion-resistant Cr2O3 passivation film, is one of the basic elements of stainless steel to maintain corrosion resistance, chromium content increases the passivation film repair ability of steel, the general stainless steel chromium content must be above 12%;

  • 2205 304l 316 316l Hl 2B Brushed Stainless Steel Round Bar

    2205 304l 316 316l Hl 2B Brushed Stainless Steel Round Bar

    Stainless steel round steel is not only a long product, but also a bar. The so-called stainless steel round steel refers to a long product with a uniform circular cross-section, generally about four meters in length. Can be divided into aperture and black rod. The so-called smooth circle means that the surface is smooth and has undergone quasi-rolling treatment; the so-called black strip means that the surface is thick and black and is directly hot-rolled.

  • Cold Drawn Stainless Steel Round Bar

    Cold Drawn Stainless Steel Round Bar

    304L stainless steel round steel is a variant of 304 stainless steel with lower carbon content, and is used where welding is required. The low carbon content minimizes the precipitation of carbides in the heat-affected zone near the weld, and the precipitation of carbides may cause stainless steel to produce intergranular corrosion in some environments

  • Cold Rolled Stainless Steel Round Steel

    Cold Rolled Stainless Steel Round Steel

    Stainless steel round steel belongs to the category of long products and bars. The so-called stainless steel round steel refers to long products with uniform circular cross-section, generally about four meters in length. It can be divided into light circles and black rods. The so-called smooth circle refers to the smooth surface, which is obtained by quasi-rolling treatment; and the so-called black bar refers to the black and rough surface, which is directly hot rolled.

  • 304 Stainless Steel Plate

    304 Stainless Steel Plate

    304 stainless steel is a general steel with good corrosion resistance. Its thermal conductivity is better than that of austenite, its coefficient of thermal expansion is smaller than that of austenite, heat fatigue resistance, addition of stabilizing element titanium, and good mechanical properties at the weld. 304stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 304F is a kind of steel with free cutting performance on 304 steel. It is mainly used for automatic lathes, bolts and nuts. 430lx adds Ti or Nb to 304 steel and reduces the content of C, which improves the processability and welding performance. It is mainly used in hot water tank, hot water supply system, sanitary ware, household durable appliances, bicycle flywheel, etc.

  • Stainless Steel Hammered Sheet/SS304 316 Embossed Pattern Plate

    Stainless Steel Hammered Sheet/SS304 316 Embossed Pattern Plate

    We can manufacture various kinds of stainless steel checkered sheet , Our embossing pattern includes pearl board, small squares, lozenge grid lines, antique checkered, twill, chrysanthemum, bamboo, sand plate, cube, free grain, stone pattern, butterfly, small diamond, oval, panda, european-style decorative pattern etc. Customized pattern also can be available.

  • Stainless Steel Sheet 2B Surface 1Mm SUS420 Stainless Steel Plate

    Stainless Steel Sheet 2B Surface 1Mm SUS420 Stainless Steel Plate

    lace of Origin: China

    Brand Name: Application:Construction, Industry, Decoration

    Standard: JIS, AiSi, ASTM, GB, DIN, EN

    Width: 500-2500mm

    Processing Service: Bending, Welding, Cutting

    Product name: Stainless Steel Sheet 2B Surface 1Mm SUS420 Stainless Steel Plate

  • 316l Stainless Steel Seamless Steel Pipe

    316l Stainless Steel Seamless Steel Pipe

    The stainless steel pipes are all made of imported first-class positive stainless steel plates. The characteristics are: no sand holes, no sand holes, no black spots, no cracks, and a smooth weld bead. Bending, cutting, welding processing performance advantages, stable nickel content, products comply with Chinese GB, American ASTM, Japanese JIS and other specifications!

  • 321 Stainless Steel Seamless Pipe

    321 Stainless Steel Seamless Pipe

    310S stainless steel pipe is a hollow long round steel, which is widely used in petroleum, chemical, medical, food, light industry, mechanical instruments, etc. When the bending and torsion strength are the same, the weight is lighter, and it is widely used in the manufacture of mechanical parts and engineering structures. Also often used as conventional weapons, barrels, shells, etc.el hot-rolled and cold-drawn (rolled) seamless steel tubes.

123 Next > >> Page 1 / 3